Package: aruba-serclient Source: aruba-serclient Version: 0.01-2 Architecture: all Maintainer: Aruba S.p.A. Installed-Size: 672 Depends: lsb-base (>= 3.2-14), python:any (>= 2.7) Homepage: https://github.com/pmcloud/ExtraControl Priority: extra Section: admin Filename: pool/main/a/aruba-serclient/aruba-serclient_0.01-2_all.deb Size: 115662 SHA256: d66aab075f3171642169e3671e51e0bd710e37feaafa684506d1f7babbbf5132 SHA1: 5810d0675f79b9758e0ef6e53b55d0d4eb7a17b0 MD5sum: 340ab67df9e8739a08d93db6819ac5d7 Description: Automate common system administration tasks Package: chrony Version: 2.2.1-1~bpo8+1 Architecture: amd64 Maintainer: Vincent Blut Installed-Size: 799 Depends: libc6 (>= 2.17), libcap2 (>= 1:2.10), libedit2 (>= 2.11-20080614), libseccomp2 (>= 0.0.0~20120605), libtomcrypt0, ucf, install-info, iproute2, lsb-base, adduser, util-linux (>= 2.20.1-5) Conflicts: ntp, time-daemon Replaces: time-daemon Provides: time-daemon Homepage: http://chrony.tuxfamily.org Priority: optional Section: net Filename: pool/main/c/chrony/chrony_2.2.1-1~bpo8+1_amd64.deb Size: 264620 SHA256: 9d8e9f707b00ed314f870746c5aeaa5f631323b93a38e2b6c901c8f619e3972a SHA1: d5cd603d90bddb3ba5f4506221b33249a627cb99 MD5sum: 2e991fe0a155fab4ce22e6a4c36849ed Description: Versatile implementation of the Network Time Protocol It consists of a pair of programs: . chronyd: This is a daemon which runs in background on the system. It obtains measurements (e.g. via the network) of the system's offset relative to other systems and adjusts the system time accordingly. For isolated systems, the user can periodically enter the correct time by hand (using 'chronyc'). In either case 'chronyd' determines the rate at which the computer gains or loses time, and compensates for this. Chronyd implements the NTP protocol and can act as either a client or a server. . chronyc: This is a command-line driven control and monitoring program. An administrator can use this to fine-tune various parameters within the daemon, add or delete servers etc whilst the daemon is running. Package: courier-analog Installed-Size: 72 Maintainer: Viktor Szépe Architecture: amd64 Version: 0.17-1 Depends: libc6 (>= 2.19), libcourier-unicode1 Provides: courier-analog Priority: extra Section: mail Filename: pool/main/c/courier-analog/courier-analog_0.17-1_amd64.deb Size: 14578 SHA256: 6d3d32abc2335e2563c56952e24c7bf5848149800ab5bf4217e088c0ee044cfb SHA1: 7c5dfba5fe2924da978fac50eebf4c244159897c MD5sum: 83581859c7e871e8aa0f5520cd0615a8 Description: Generate log summaries for the Courier mail server. Package: courier-authdaemon Source: courier-authlib Version: 0.68.0-3~bpo8+1 Architecture: amd64 Maintainer: Markus Wanner Installed-Size: 82 Depends: courier-authlib (>= 0.68.0-3~bpo8+1), lsb-base (>= 3.0-10), sysvinit-utils (>= 2.88dsf-50) | init-d-script Homepage: https://www.courier-mta.org/ Priority: optional Section: mail Filename: pool/main/c/courier-authlib/courier-authdaemon_0.68.0-3~bpo8+1_amd64.deb Size: 19282 SHA256: 7936b5e162ea4d8f736494f1f30e68301389a1c9ae17541a226c6e25a649efdd SHA1: 8d0fd4713ccf5a2f95fcbae547c0d1a5e4e49d38 MD5sum: 955576d4182ee6e0e7e8b8c5b0806ea9 Description: Courier authentication daemon This package contains the authentication daemon for the Courier applications. Package: courier-authlib Version: 0.68.0-3~bpo8+1 Architecture: amd64 Maintainer: Markus Wanner Installed-Size: 334 Depends: adduser, libc6 (>= 2.15), libgcc1 (>= 1:4.1.1), libgdbm3 (>= 1.8.3), libltdl7 (>= 2.4.2), libpam0g (>= 0.99.7.1), libstdc++6 (>= 4.4.0) Recommends: expect Breaks: courier-base (<< 0.75.0-15), maildrop (<< 2.7.1-4) Homepage: https://www.courier-mta.org/ Priority: optional Section: mail Filename: pool/main/c/courier-authlib/courier-authlib_0.68.0-3~bpo8+1_amd64.deb Size: 90724 SHA256: c5bf6d8310a10e324b240128631c6c0ba31299c84f4780a67380dfffba1e5747 SHA1: 5d847767767d21f5ee50c524699d97647b2ec9fc MD5sum: 8f45f5ba45af5aaed7c6bfd96184ec2e Description: Courier authentication library The Courier authentication library provides authentication services for other Courier applications. Package: courier-authlib-dev Source: courier-authlib Version: 0.68.0-3~bpo8+1 Architecture: amd64 Maintainer: Markus Wanner Installed-Size: 878 Depends: courier-authlib (>= 0.68.0-3~bpo8+1), libc6 (>= 2.4) Homepage: https://www.courier-mta.org/ Priority: optional Section: mail Filename: pool/main/c/courier-authlib/courier-authlib-dev_0.68.0-3~bpo8+1_amd64.deb Size: 172750 SHA256: 9ad64befe7238b764926956699b77fe568aefcff3a3acdcf0c4fedc0bb9be4b5 SHA1: efc4dab926b5b1173df41bca6a2577930a3cdf3b MD5sum: 8ae8edad259c5072f7c8d37e0e2187e9 Description: Development libraries for the Courier authentication library This package contains the development libraries and files needed to compile Courier packages that use the Courier authentication library. Package: courier-authlib-ldap Source: courier-authlib Version: 0.68.0-3~bpo8+1 Architecture: amd64 Maintainer: Markus Wanner Installed-Size: 161 Depends: courier-authlib (>= 0.68.0-3~bpo8+1), libc6 (>= 2.14), libgcc1 (>= 1:4.1.1), libldap-2.4-2 (>= 2.4.7), libstdc++6 (>= 4.2.1) Homepage: https://www.courier-mta.org/ Priority: optional Section: mail Filename: pool/main/c/courier-authlib/courier-authlib-ldap_0.68.0-3~bpo8+1_amd64.deb Size: 52886 SHA256: 53d15d687f3724e801baf08b40f7f7e3da90bd3499062232c92ae123298607f7 SHA1: 38e287c553e81fc31495858a9ec4a060f1250236 MD5sum: cb2799a47c53c997f71b949662c3b20d Description: LDAP support for the Courier authentication library This package contains the LDAP support for the Courier authentication library. Package: courier-authlib-mysql Source: courier-authlib Version: 0.68.0-3~bpo8+1 Architecture: amd64 Maintainer: Markus Wanner Installed-Size: 145 Depends: courier-authlib (>= 0.68.0-3~bpo8+1), libc6 (>= 2.14), libgcc1 (>= 1:4.1.1), libmysqlclient18 (>= 5.5.24+dfsg-1), libstdc++6 (>= 4.2.1), zlib1g (>= 1:1.1.4) Homepage: https://www.courier-mta.org/ Priority: optional Section: mail Filename: pool/main/c/courier-authlib/courier-authlib-mysql_0.68.0-3~bpo8+1_amd64.deb Size: 44462 SHA256: bbfb7c75485d6adcdd56e0613d22b06993b21650ffcc484051f08e30646f8942 SHA1: 4952cedc1d36223ab10361b94e50df0a2ca77dc1 MD5sum: ab6adcbb460e5958a377ab36d17cee18 Description: MySQL support for the Courier authentication library This package contains the MySQL support for the Courier authentication library. Package: courier-authlib-pipe Source: courier-authlib Version: 0.68.0-3~bpo8+1 Architecture: amd64 Maintainer: Markus Wanner Installed-Size: 61 Depends: courier-authlib (>= 0.68.0-3~bpo8+1), libc6 (>= 2.15) Homepage: https://www.courier-mta.org/ Priority: optional Section: mail Filename: pool/main/c/courier-authlib/courier-authlib-pipe_0.68.0-3~bpo8+1_amd64.deb Size: 20032 SHA256: 4b502821721955a055188b8385d313a4f6fc9774a84e90fadbcb6efdab509af1 SHA1: 074d0df82b82db9f5b9c82e519447944a3046368 MD5sum: 32c78c4273f1c6f5b208d39930e9c489 Description: External authentication support for the Courier authentication library This package contains external authentication support via pipes for the Courier authentication library. The authpipe module is a generic plugin that enables authentication requests to be serviced by an external program, then communicates through messages on stdin and stdout. Package: courier-authlib-postgresql Source: courier-authlib Version: 0.68.0-3~bpo8+1 Architecture: amd64 Maintainer: Markus Wanner Installed-Size: 137 Depends: courier-authlib (>= 0.68.0-3~bpo8+1), libc6 (>= 2.14), libgcc1 (>= 1:4.1.1), libpq5, libstdc++6 (>= 4.2.1) Homepage: https://www.courier-mta.org/ Priority: optional Section: mail Filename: pool/main/c/courier-authlib/courier-authlib-postgresql_0.68.0-3~bpo8+1_amd64.deb Size: 41258 SHA256: 5b8e1ad136425aeae8f21f235a32f9bb0a77ef27fd6fa076cc44e2df9a8b5abe SHA1: 52a6db8209aa6a467356b6474d40541da1b76eee MD5sum: 00633be94adfe4514a71a981a423703c Description: PostgreSQL support for the Courier authentication library This package contains the PostgreSQL support for the Courier authentication library. Package: courier-authlib-sqlite Source: courier-authlib Version: 0.68.0-3~bpo8+1 Architecture: amd64 Maintainer: Markus Wanner Installed-Size: 136 Depends: courier-authlib (>= 0.68.0-3~bpo8+1), libc6 (>= 2.14), libgcc1 (>= 1:4.1.1), libsqlite3-0 (>= 3.5.9), libstdc++6 (>= 4.2.1) Homepage: https://www.courier-mta.org/ Priority: optional Section: mail Filename: pool/main/c/courier-authlib/courier-authlib-sqlite_0.68.0-3~bpo8+1_amd64.deb Size: 37868 SHA256: c9d96575d9268d1b390c9a132651608719ce632aa275e0a6282ece6bc3f49845 SHA1: ead06bb7e1acfb297c412d26c46d035af5dfe99f MD5sum: ee4131271338d4645f276554d566fed9 Description: SQLite 3 support for the Courier authentication library This package contains the SQLite 3 support for the Courier authentication library. Package: courier-authlib-userdb Source: courier-authlib Version: 0.68.0-3~bpo8+1 Architecture: amd64 Maintainer: Markus Wanner Installed-Size: 123 Depends: courier-authlib (>= 0.68.0-3~bpo8+1), libc6 (>= 2.14), libgdbm3 (>= 1.8.3) Homepage: https://www.courier-mta.org/ Priority: optional Section: mail Filename: pool/main/c/courier-authlib/courier-authlib-userdb_0.68.0-3~bpo8+1_amd64.deb Size: 44182 SHA256: 7ffe264e8b3ba0b70972dd97106e2a14d98024eca4a8fb0b028e95e66d6b43f4 SHA1: a6c5c2d56f114aa03af8e5d3e589fcb0bc7e983f MD5sum: 11987cb1dc2b6ef0c9ba30824dddbf17 Description: userdb support for the Courier authentication library This package contains the userdb support for the Courier authentication library. Userdb is a simple way to manage virtual mail accounts using a GDBM-based database file. Package: courier-base Source: courier Version: 0.76.3-5~bpo8+1 Architecture: amd64 Maintainer: Markus Wanner Installed-Size: 670 Depends: adduser, courier-authdaemon, courier-authlib (>= 0.66.1), courier-authlib-userdb, debconf (>= 0.5) | debconf-2.0, gnutls-bin, lsb-base, sysvinit-utils (>= 2.88dsf-50) | init-d-script, perl, libc6 (>= 2.15), libcourier-unicode1, libfam0, libgdbm3 (>= 1.8.3), libgnutls-deb0-28 (>= 3.3.0) Breaks: courier-authdaemon (<< 0.66.4-4~), courier-ssl (<< 0.75.0-1) Replaces: courier-ssl (<< 0.75.0-1) Homepage: http://www.courier-mta.org/ Priority: optional Section: mail Filename: pool/main/c/courier/courier-base_0.76.3-5~bpo8+1_amd64.deb Size: 271118 SHA256: 6946299fa5ea47909e2f54a525b7b176bce44a5b85e5830bc680bdafa54c2f7d SHA1: 1b91b6c91c602348ae3fddd0be38aa45a2f288e3 MD5sum: 8a279711e75acdc0a0aa10b7bbdce1e5 Description: Courier mail server - base system The Courier mail transfer agent (MTA) is an integrated mail/groupware server based on open commodity protocols, such as ESMTP, IMAP, POP3, LDAP, TLS, and HTTP. Courier provides ESMTP, IMAP, POP3, webmail, and mailing list services within a single, consistent, framework. . This package provides the functionality needed by all courier packages such as some configuration files, helper programs and the Courier TCP server daemon. . Courier uses the a TLS wrapper application named couriertls instead of embedding TLS support in the different applications. Additionally, this package contains a default set of trusted X.509 root CA certs. Package: courier-imap Source: courier (0.76.3-5~bpo8+1) Version: 4.17.2+0.76.3-5~bpo8+1 Architecture: amd64 Maintainer: Markus Wanner Installed-Size: 601 Depends: courier-base (= 0.76.3-5~bpo8+1), debconf | debconf-2.0, default-mta | mail-transport-agent, sysvinit-utils (>= 2.88dsf-50) | init-d-script, init-system-helpers (>= 1.18~), courier-authlib, libc6 (>= 2.15), libcourier-unicode1, libfam0, libgdbm3 (>= 1.8.3), libidn11 (>= 1.13) Suggests: courier-doc, imap-client Conflicts: imap-server Breaks: courier-imap-ssl (<< 4.16.2+0.75.0-1~) Replaces: courier-imap-ssl (<< 4.16.2+0.75.0-1~), imap-server Provides: imap-server Homepage: http://www.courier-mta.org/ Priority: extra Section: mail Filename: pool/main/c/courier/courier-imap_4.17.2+0.76.3-5~bpo8+1_amd64.deb Size: 242982 SHA256: 75a1de992c8c25a22506ea9a032b6c7405013c6684464e8bf63ff74a4b76007a SHA1: b2199172cd8072866cbffb7ea92e3ae3d2579cca MD5sum: d4999604ace9beec3010e97012e76018 Description: Courier mail server - IMAP server The Courier mail transfer agent (MTA) is an integrated mail/groupware server based on open commodity protocols, such as ESMTP, IMAP, POP3, LDAP, TLS, and HTTP. Courier provides ESMTP, IMAP, POP3, webmail, and mailing list services within a single, consistent, framework. . This package provides an IMAP server that accesses email stored in Maildirs format mailboxes. This server has an extremely small footprint and provides shared and virtual shared folders. . IMAP over TLS is handled by the regular IMAP daemon in conjunction with the TLS wrapper. Package: courier-mta Source: courier Version: 0.76.3-5~bpo8+1 Architecture: amd64 Maintainer: Markus Wanner Installed-Size: 2040 Depends: courier-base (= 0.76.3-5~bpo8+1), debconf (>= 0.5) | debconf-2.0, libnet-cidr-perl, sysvinit-utils (>= 2.88dsf-50) | init-d-script, init-system-helpers (>= 1.18~), courier-authlib, libc6 (>= 2.15), libcourier-unicode1, libgcc1 (>= 1:4.1.1), libgdbm3 (>= 1.8.3), libidn11 (>= 1.13), libperl5.20 (>= 5.20.2), libstdc++6 (>= 4.9) Suggests: courier-doc, courier-filter-perl, couriergrey, mail-reader Conflicts: mail-transport-agent Breaks: courier-mta-ssl (<< 0.75.0-1~) Replaces: courier-mta-ssl (<< 0.75.0-1~), mail-transport-agent Provides: mail-transport-agent Homepage: http://www.courier-mta.org/ Priority: extra Section: mail Filename: pool/main/c/courier/courier-mta_0.76.3-5~bpo8+1_amd64.deb Size: 570336 SHA256: 626d83615be4f037c873bec8e3349a12dd94acecaa60865a152674d93e70b26a SHA1: afaa914177affd9551e8c1d2699d9b2a7b39be4a MD5sum: 32cce954ad976921f45d97b32d1bfab8 Description: Courier mail server - ESMTP daemon The Courier mail transfer agent (MTA) is an integrated mail/groupware server based on open commodity protocols, such as ESMTP, IMAP, POP3, LDAP, TLS, and HTTP. Courier provides ESMTP, IMAP, POP3, webmail, and mailing list services within a single, consistent, framework. . This package provides an ESMTP daemon which uses the Maildir format as native storage format, supports IPv6, implements SMTP extensions for mailing list management and features integrated mail filtering. It can function as an intermediate mail relay, relaying mail between an internal LAN and the Internet, or perform final delivery to mailboxes. . ESMTP over TLS is handled by the regular ESMTP daemon in conjunction with the TLS wrapper. Package: courier-pop Source: courier Version: 0.76.3-5~bpo8+1 Architecture: amd64 Maintainer: Markus Wanner Installed-Size: 297 Depends: courier-base (= 0.76.3-5~bpo8+1), debconf | debconf-2.0, default-mta | mail-transport-agent, sysvinit-utils (>= 2.88dsf-50) | init-d-script, init-system-helpers (>= 1.18~), courier-authlib, libc6 (>= 2.15) Suggests: courier-doc, mail-reader Conflicts: pop3-server Breaks: courier-pop-ssl (<< 0.75.0-1~) Replaces: courier-pop-ssl (<< 0.75.0-1~), pop3-server Provides: pop3-server Homepage: http://www.courier-mta.org/ Priority: extra Section: mail Filename: pool/main/c/courier/courier-pop_0.76.3-5~bpo8+1_amd64.deb Size: 132838 SHA256: 1ce0f594d8a604076104358ebff7988c463292c3d8a54972732be58904bb2545 SHA1: ddc779491a8acf23c080d7d0cb776ae03cefe168 MD5sum: c2b5f81689bdfc00ae7e9b41415f78ba Description: Courier mail server - POP3 server The Courier mail transfer agent (MTA) is an integrated mail/groupware server based on open commodity protocols, such as ESMTP, IMAP, POP3, LDAP, TLS, and HTTP. Courier provides ESMTP, IMAP, POP3, webmail, and mailing list services within a single, consistent, framework. . This package provide the POP3 daemon for Courier. It only supports email stored in the Maildir format. . POP3 over TLS is handled by the regular POP3 daemon from in conjunction with the TLS wrapper. Package: couriersrs Installed-Size: 32 Maintainer: Viktor Szépe Architecture: amd64 Version: 0.1.2-3 Depends: libc6 (>= 2.15), libgcc1 (>= 1:4.1.1), libstdc++6 (>= 4.9), libsrs2-0 (>= 1.0.18), courier-mta Provides: couriersrs Priority: extra Section: mail Filename: pool/main/c/couriersrs/couriersrs_0.1.2-3_amd64.deb Size: 7480 SHA256: 75667ece5bd7aa925116422b0e1ff7deae65a56ec121fa1435864d4a5cd8533e SHA1: 787d4545c1a1f7fdf692efa4fe0e142d8f33512f MD5sum: 848bf6aa22453c331180b6f63924ae69 Description: Forwarding messages in courier using SRS Package: dh-make-php Version: 0.6.1 Architecture: all Maintainer: Uwe Steinmann Installed-Size: 176 Depends: make | build-essential | dpkg-dev, php5-cli | php-cli, php-pear, cdbs Priority: optional Section: web Filename: pool/main/d/dh-make-php/dh-make-php_0.6.1_all.deb Size: 31702 SHA256: b9f1055018bb0fe7d89b47aa4fc40bcee168af5b78428ac8a1bbc6c76d1a679c SHA1: 9f534a1b7e7c36b00c45698457250ad039043bef MD5sum: 6859de6585bd1942a557fd6a7e39561b Description: Creates Debian source packages for PHP PEAR and PECL extensions Contains dh-make-pear and dh-make-pecl, which create Debian source packages from PHP PEAR and PECL packages respectively. Package: fail2ban Version: 0.9.5-1 Architecture: all Maintainer: Yaroslav Halchenko Installed-Size: 1253 Depends: python3:any (>= 3.3.2-2~), init-system-helpers (>= 1.18~), lsb-base (>= 2.0-7) Recommends: python, iptables, whois, python3-pyinotify, python3-systemd Suggests: mailx, system-log-daemon, monit Homepage: http://www.fail2ban.org Priority: optional Section: net Filename: pool/main/f/fail2ban/fail2ban_0.9.5-1_all.deb Size: 280912 SHA256: dd1567bcfbc61f2777da46bbd0f348ff684570b064ef0f4c691a65b5464494f5 SHA1: 9db57842351b3f7ca5a83ec1615d96b8491f7391 MD5sum: a8dd0ae60cec74b89a9adc10251ce2e5 Description: ban hosts that cause multiple authentication errors Fail2ban monitors log files (e.g. /var/log/auth.log, /var/log/apache/access.log) and temporarily or persistently bans failure-prone addresses by updating existing firewall rules. Fail2ban allows easy specification of different actions to be taken such as to ban an IP using iptables or hostsdeny rules, or simply to send a notification email. . By default, it comes with filter expressions for various services (sshd, apache, qmail, proftpd, sasl etc.) but configuration can be easily extended for monitoring any other text file. All filters and actions are given in the config files, thus fail2ban can be adopted to be used with a variety of files and firewalls. Following recommends are listed: . - iptables -- default installation uses iptables for banning. You most probably need it - whois -- used by a number of *mail-whois* actions to send notification emails with whois information about attacker hosts. Unless you will use those you don't need whois - python3-pyinotify -- unless you monitor services logs via systemd, you need pyinotify for efficient monitoring for log files changes Package: goaccess Version: 1:1.2-3~bpo8+1 Architecture: amd64 Maintainer: Chris Taylor Installed-Size: 926 Depends: libbz2-1.0, libc6 (>= 2.15), libgeoip1, libncursesw5 (>= 5.6+20070908), libtinfo5, libtokyocabinet9 (>= 1.4.47), zlib1g (>= 1:1.1.4) Built-Using: d3 (= 3.4.11-2), fonts-font-awesome (= 4.2.0~dfsg-1), python-xstatic-hogan (= 2.0.0.2-1~bpo8+1), twitter-bootstrap3 (= 3.2.0+dfsg-1) Homepage: http://goaccess.prosoftcorp.com/ Priority: extra Section: utils Filename: pool/main/g/goaccess/goaccess_1.2-3~bpo8+1_amd64.deb Size: 296086 SHA256: 378e6cf14ad44d795accdb123cc52f11141037b4d74f37f5d88f52a9b4112c0b SHA1: 46b7114f1bc5f45c3abc35bb8efbc52074ca7ec6 MD5sum: 1a9a28494e38fdc84bc2acdcc86867dd Description: log analyzer and interactive viewer for the Apache Webserver Displays fast and valuable HTTP statistics for system administrators that require a visual report on the fly. . The collected information will be displayed to the user (sysadmin) in a visual/interactive window. Collected information includes: . -General Statistics, Bandwidth etc. -Top Visitors -Requested files -Requested static files, images, swf, js, etc. -Referrers URLs -404 or Not Found -Operating Systems -Browsers and Spiders -Hosts, Reverse DNS, IP Location -HTTP Status Codes -Referring Sites -Unlimited log file size . GoAccess can parse both of Apaches' log formats, the Common Log Format and the Combined Log Format Package: htop Version: 2.0.1-1~bpo8+1 Architecture: amd64 Maintainer: Daniel Lange Installed-Size: 250 Depends: libc6 (>= 2.15), libncursesw5 (>= 5.6+20070908), libtinfo5 Suggests: lsof, strace Homepage: http://hisham.hm/htop/ Priority: optional Section: utils Filename: pool/main/h/htop/htop_2.0.1-1~bpo8+1_amd64.deb Size: 88858 SHA256: 3f33530355994202ccf1bd3210051dae067194b9d94eadf6608afa726611e31b SHA1: 11d498e49b94ab785ff48015311214e423b8c880 MD5sum: 8e80706dc87fc70717d62ef0368b81a2 Description: interactive processes viewer Htop is an ncursed-based process viewer similar to top, but it allows one to scroll the list vertically and horizontally to see all processes and their full command lines. . Tasks related to processes (killing, renicing) can be done without entering their PIDs. Package: imgmin Installed-Size: 68 Maintainer: viktor@szepe.net Architecture: amd64 Version: 1.1-1 Provides: imgmin Priority: extra Section: checkinstall Filename: pool/main/i/imgmin/imgmin_1.1-1_amd64.deb Size: 16656 SHA256: fc178e413020d50366eba0b1b19d6c191e6b5914db0a04e3cbdbf49e7decdd68 SHA1: c85b9e8a848fe98ac509844309e822da8ae1c9bb MD5sum: 36be3a67c51e3d6dfdd19312604ab2a2 Description: Lossy image optimization Package: init-alert Version: 0.3.2 Architecture: all Maintainer: Viktor Szépe Installed-Size: 49 Depends: lsb-base (>= 4.1), s-nail | mailx, psmisc Homepage: https://github.com/szepeviktor/debian-server-tools Priority: optional Section: misc Filename: pool/main/i/init-alert/init-alert_0.3.2_all.deb Size: 4290 SHA256: 331890b3ffe3442e00ad1a38bb15ca23b390d31cf4d35623510f4625028e443f SHA1: e423b0fd27bc3a2005b26083bdbeba535410125e MD5sum: 13f56a5fe2992160d7e762fb18942afe Description: Send alert mail on boot and on shutdown, on boot send pstree to know what services are started, on halt send a list of who is logged on Package: ipset-persistent Version: 2.0.0 Architecture: all Maintainer: Viktor Szépe Installed-Size: 35 Depends: ipset, netfilter-persistent Priority: optional Section: net Filename: pool/main/i/ipset-persistent/ipset-persistent_2.0.0_all.deb Size: 3334 SHA256: f52e394293647fdd3222d84e4038ef207869f8c4ff594fdf3e423acde68c27ec SHA1: 6660257fd9633042a3723fd7e53541a3ca039a23 MD5sum: bb101315423c57edb2f234ce93510a3d Description: IP set plugin for netfilter-persistent Originally by @jordanrinke Package: iptables-persistent Version: 1.0.4~bpo8+1 Architecture: all Maintainer: Jonathan Wiltshire Installed-Size: 66 Depends: netfilter-persistent (= 1.0.4~bpo8+1), iptables, debconf (>= 0.5) | debconf-2.0 Priority: optional Section: admin Filename: pool/main/i/iptables-persistent/iptables-persistent_1.0.4~bpo8+1_all.deb Size: 12136 SHA256: 2f9dd12c3bd6be1f93c5bdbf398656139da2416cf3cb8e0b27e20536d3863b57 SHA1: 96c903c4d2817f81df5843581a23ab35475323ad MD5sum: ff63dbffef6845c44d766cfe65b63fb2 Description: boot-time loader for netfilter rules, iptables plugin netfilter-persistent is a loader for netfilter configuration using a plugin-based architecture. . This package contains the iptables and ip6tables plugins. Package: jpeg-archive Installed-Size: 1832 Maintainer: Viktor Szépe Architecture: amd64 Version: 2.1.1-3 Depends: libc6 (>= 2.14) Provides: jpeg-archive Priority: extra Section: graphics Filename: pool/main/j/jpeg-archive/jpeg-archive_2.1.1-3_amd64.deb Size: 177380 SHA256: eed98a8edf79eb33ec27c95d4c1b81f84e8b2a8d5c94a7cbdcf9987e5c4e7c96 SHA1: cca87650fcfaa08ef93460c975d3a29f4877f862 MD5sum: 78ee048c7edbdbbc5cd9fa3a80bfb6cc Description: Utilities for archiving JPEGs for long term storage. Package: libcourier-unicode-dev Source: courier-unicode Version: 1.4-3~bpo8+1 Architecture: amd64 Maintainer: Debian QA Group Installed-Size: 486 Depends: libcourier-unicode1 (= 1.4-3~bpo8+1) Multi-Arch: same Homepage: http://www.courier-mta.org/ Priority: optional Section: libdevel Filename: pool/main/c/courier-unicode/libcourier-unicode-dev_1.4-3~bpo8+1_amd64.deb Size: 82088 SHA256: 95c15dace7babf366971819e064d17e0f8576e6feaca80cacad8e501ae16ba02 SHA1: ca285ddb5ce4d6d8069b3c02bb1711f1e7c27018 MD5sum: 0c0769792cd75fd6b93fa509d96d222b Description: Courier Unicode library (development files and headers) This library implements several algorithms related to the Unicode Standard: - Look up uppercase, lowercase, and titlecase equivalents of a unicode character. - Implementation of grapheme and work breaking rules. - Implementation of line breaking rules. - Several ancillary functions, like looking up the unicode character that corresponds to some HTML 4.0 entity (such as “&”, for example), and determining the normal width or a double-width status of a unicode character. Also, an adaptation of the iconv(3) API for this unicode library. - Look up Unicode script property. Package: libcourier-unicode1 Source: courier-unicode Version: 1.4-3~bpo8+1 Architecture: amd64 Maintainer: Debian QA Group Installed-Size: 318 Depends: libc6 (>= 2.14), libgcc1 (>= 1:4.1.1), libstdc++6 (>= 4.6) Built-Using: unicode-data (= 7.0-2), w3c-sgml-lib (= 1.3-1) Multi-Arch: same Homepage: http://www.courier-mta.org/ Priority: optional Section: libs Filename: pool/main/c/courier-unicode/libcourier-unicode1_1.4-3~bpo8+1_amd64.deb Size: 43058 SHA256: b8eb4c326400bd7826feff8240fe04643393b5901aca7e59edb1d396d8a825df SHA1: 753f2d69d87f6952202cef4b9d6433b68ff8b86f MD5sum: f29a317bf10957cee86f8606e6bdafcf Description: Courier Unicode library (shared runtime library) This library implements several algorithms related to the Unicode Standard: - Look up uppercase, lowercase, and titlecase equivalents of a unicode character. - Implementation of grapheme and work breaking rules. - Implementation of line breaking rules. - Several ancillary functions, like looking up the unicode character that corresponds to some HTML 4.0 entity (such as “&”, for example), and determining the normal width or a double-width status of a unicode character. Also, an adaptation of the iconv(3) API for this unicode library. - Look up Unicode script property. Package: libnghttp2-5 Source: nghttp2 Version: 1.0.4-1 Architecture: amd64 Maintainer: Dave Beckett Installed-Size: 233 Pre-Depends: multiarch-support Depends: libc6 (>= 2.14) Multi-Arch: same Homepage: http://tatsuhiro-t.github.io/nghttp2/ Priority: optional Section: libs Filename: pool/main/n/nghttp2/libnghttp2-5_1.0.4-1_amd64.deb Size: 77094 SHA256: 23dad364dce8514154621fa3ee77cb0856af7878a5f0514faaa5133a5a8fb07f SHA1: f9d8d882eba207d70ef14c20adf0e9716bc24480 MD5sum: 473503ebcc08ec99ac6eaea3e022080c Description: nghttp HTTP 2.0 library Provides a library that provides an experimental implementation of Hypertext Transfer Protocol version 2.0. Package: libopendkim-dev Source: opendkim Version: 2.11.0~alpha-8~bpo8+1 Architecture: amd64 Maintainer: Scott Kitterman Installed-Size: 712 Depends: libopendkim11 (= 2.11.0~alpha-8~bpo8+1) Homepage: http://www.opendkim.org/ Priority: extra Section: libdevel Filename: pool/main/o/opendkim/libopendkim-dev_2.11.0~alpha-8~bpo8+1_amd64.deb Size: 159888 SHA256: 4bb3700f53d6defc324b15d3ae45a9b473e71d59a619358c0a3f6eec3794be56 SHA1: fd5714ec582203825902f5f98853020e0a2d5b5b MD5sum: cfa91888ff1e1aa4cfc03b3d901122b2 Description: Headers and development libraries for the OpenDKIM library The OpenDKIM Project is a community effort to develop and maintain a C library for producing DKIM-aware applications and an open source milter for providing DomainKeys Identified Mail (DKIM) service. . This package provides the required header files and development libraries for developing against the OpenDKIM library. Package: libopendkim11 Source: opendkim Version: 2.11.0~alpha-8~bpo8+1 Architecture: amd64 Maintainer: Scott Kitterman Installed-Size: 198 Depends: libbsd0 (>= 0.0), libc6 (>= 2.14), libdb5.3, libssl1.0.0 (>= 1.0.0) Homepage: http://www.opendkim.org/ Priority: extra Section: libs Filename: pool/main/o/opendkim/libopendkim11_2.11.0~alpha-8~bpo8+1_amd64.deb Size: 92256 SHA256: 852902b19c04aff0aa7b2eb91c58c254883df9be7aba98bce95ef35da687d10f SHA1: 94bfb9d5da6b8e63a1c55317c325c5ff49ff29c9 MD5sum: 81afbd901acc3b127dd3a348b10dd062 Description: Library for signing and verifying DomainKeys Identified Mail signatures The OpenDKIM Project is a community effort to develop and maintain a C library for producing DKIM-aware applications and an open source milter for providing DomainKeys Identified Mail (DKIM) service. . This package provides library for implementing signing and verification of the DomainKeys Identified Mail (DKIM) standard. This library provides support for signing and verifying signatures according to RFC 4871, and supports both DomainKeys signing policy and DKIM ADSP. Package: libsrs2-0 Source: libsrs2 Version: 1.0.18-5 Architecture: amd64 Maintainer: Pierre Habouzit Installed-Size: 57 Depends: libc6 (>= 2.14) Priority: optional Section: libs Filename: pool/main/libs/libsrs2/libsrs2-0_1.0.18-5_amd64.deb Size: 14466 SHA256: dc6a0c3a1a12cb24d2f5aad01ed6b71215a95eb9c5fac5a1857da3d4f7568886 SHA1: eec78156c21854d8716a196caf13c9cb8fde5f81 MD5sum: 56537eb45ef34a4ea99cb95f786d0856 Description: SRS email address rewriting engine libsrs2 is the next generation SRS library. SPF verifies that the Sender address of a mail matches (according to some policy) the client IP address which submits the mail. When a mail is forwarded, the sender address must be rewritten to comply with SPF policy. The Sender Rewriting Scheme, or SRS, provides a standard for this rewriting which is not vulnerable to attacks by spammers. Package: libsrs2-dev Source: libsrs2 Version: 1.0.18-5 Architecture: amd64 Maintainer: Pierre Habouzit Installed-Size: 67 Depends: libsrs2-0 (= 1.0.18-5) Provides: libsrs-dev Priority: optional Section: libdevel Filename: pool/main/libs/libsrs2/libsrs2-dev_1.0.18-5_amd64.deb Size: 15354 SHA256: 96508617174b2cdb97438ab9d944bd5c7ca1909595861cea3f10b88d1a26c062 SHA1: db174b5d45f039aa230a25fa8b791bfbc4363e8e MD5sum: 753b70c3dda6b95b7abcacbd0481fcae Description: Development tools for the libsrs2 libsrs2 is the next generation SRS library. SPF verifies that the Sender address of a mail matches (according to some policy) the client IP address which submits the mail. When a mail is forwarded, the sender address must be rewritten to comply with SPF policy. The Sender Rewriting Scheme, or SRS, provides a standard for this rewriting which is not vulnerable to attacks by spammers. Package: libytnef0 Installed-Size: 432 Maintainer: viktor@szepe.net Architecture: amd64 Version: 1.7-1 Provides: libytnef0 Priority: extra Section: checkinstall Filename: pool/main/liby/libytnef0/libytnef0_1.7-1_amd64.deb Size: 65272 SHA256: 7b8667fad17493dab687087116b0fa06071651d4316da8ac769d0503671596f1 SHA1: c78484118fc9d28d67469d39311b77f258a3d4b5 MD5sum: 25202393dc8c166fa472401c894291fb Description: Yeraze's TNEF Stream Reader library Package: maildrop Version: 2.8.4-2~bpo8+1 Architecture: amd64 Maintainer: Josip Rodin Installed-Size: 1118 Depends: courier-authlib (>= 0.66.4-5~), libc6 (>= 2.15), libcourier-unicode1, libgcc1 (>= 1:4.1.1), libgdbm3 (>= 1.8.3), libpcre3 (>= 1:8.35), libstdc++6 (>= 4.4.0) Recommends: exim4 | mail-transport-agent Breaks: courier-maildrop (<< 2.8.3+0.75.0-15~) Replaces: courier-base (<= 0.58.0-1), courier-maildrop (<< 2.8.3+0.75.0-15~) Homepage: http://www.courier-mta.org/maildrop/ Priority: optional Section: mail Filename: pool/main/m/maildrop/maildrop_2.8.4-2~bpo8+1_amd64.deb Size: 340788 SHA256: 69a6810d143746db5c4d6d457cf1dd10140a983d4b4d0c81863f90cf852f1ca1 SHA1: e13ea145a6b7f59ca7b3688976af49629e07e173 MD5sum: e045a0f9f8347e931b067d40b4f262a5 Description: mail delivery agent with filtering abilities maildrop is a mail delivery agent (MDA), a program which reads a mail message from standard input and then delivers the message to your mailbox. . maildrop can deliver mail both in mbox and maildir storing formats. It can read instructions from a file, directing it how to log deliveries, and how to filter incoming mail, for example to deliver mail to alternate mailboxes, or forward it somewhere else, or pipe it through external programs. . It performs all the same functions as procmail, but unlike procmail, maildrop uses a structured filtering language which is a bit easier on the eyes. Other differences from procmail include not skipping syntax errors in filter files (instead deferring the mails for later processing) and being more resource-efficient when processing mails (not loading large messages right into memory). . maildrop also comes with the following additional programs: . * reformail, an e-mail reformatting tool, which can detect duplicate messages, manipulate message headers, split mailboxes into individual messages, and generate autoreply messages * maildirmake, which creates maildirs, and maildir folders * deliverquota, which delivers mail to maildirs while taking account software-imposed quotas * reformime, a utility for reformatting MIME messages * makemime, which creates MIME-formatted messages of arbitrary complexity * lockmail, which creates dot-locks, file locks, and C-Client folder locks * mailbot, a MIME-aware autoresponder utility Package: maldetect Version: 1.5.1-pre2-1~1.gbpd99372 Architecture: all Maintainer: Jan Wagner Installed-Size: 235 Depends: bsd-mailx | mailx, ed, gawk | mawk, wget, perl Recommends: clamav, inotify-tools Homepage: http://www.rfxn.com/projects/linux-malware-detect/ Priority: optional Section: utils Filename: pool/main/m/maldetect/maldetect_1.5.1-pre2-1~1.gbpd99372_all.deb Size: 52978 SHA256: 90ca5fb66416698885e6779d37dc4e650dd09c6af7c17910a6f858595a928eca SHA1: 8db491bbb6a32330d25ac4deb24660e801511ac8 MD5sum: 5f5fd0c6822ceef644a7ab5566ce8a8e Description: Linux malware detector Linux Malware Detect (LMD) is a malware scanner for Linux released under the GNU GPLv2 license, that is designed around the threats faced in shared hosted environments. It uses threat data from network edge intrusion detection systems to extract malware that is actively being used in attacks and generates signatures for detection. In addition, threat data is also derived from user submissions with the LMD checkout feature and from malware community resources. The signatures that LMD uses are MD5 file hashes and HEX pattern matches, they are also easily exported to any number of detection tools such as ClamAV. Package: megatools Version: 1.9.95-2 Architecture: amd64 Maintainer: Alberto Garcia Installed-Size: 382 Depends: libc6 (>= 2.14), libcurl3 (>= 7.16.2), libfuse2 (>= 2.6), libglib2.0-0 (>= 2.37.3), libssl1.0.0 (>= 1.0.0), glib-networking Recommends: fuse Homepage: http://megatools.megous.com/ Priority: optional Section: utils Filename: pool/main/m/megatools/megatools_1.9.95-2_amd64.deb Size: 110448 SHA256: 962826fae883ce159a85490a41f44638da74505084bbd32419d0049bb39f0525 SHA1: 750f419e06c7ca9db705d870aa3e8fa342cfbfc2 MD5sum: dc632e4af67a29a9a809265aa14c4ad0 Description: Command-line client for the Mega cloud storage service Megatools is a collection of programs for accessing the Mega.co.nz service from the command line. . Megatools allow you to copy individual files as well as entire directory trees to and from the cloud. You can also perform streaming downloads for example to preview videos and audio files, without needing to download the entire file first. . Megatools are robust and optimized for fast operation - as fast as Mega servers allow. Memory requirements and CPU utilization are kept at minimum. Package: monit Version: 1:5.20.0-1~bpo8+1 Architecture: amd64 Maintainer: Sergey B Kirpichev Installed-Size: 932 Depends: libc6 (>= 2.16), libpam0g (>= 0.99.7.1), libssl1.0.0 (>= 1.0.1), zlib1g (>= 1:1.2.0), lsb-base (>= 3.2-13) Suggests: exim4 | postfix | mail-transport-agent, sysvinit-core Homepage: http://mmonit.com/monit/ Priority: optional Section: admin Filename: pool/main/m/monit/monit_5.20.0-1~bpo8+1_amd64.deb Size: 302452 SHA256: 3fc4711e1653ef7460d564cb7cd9b2ceb4dea733e550862dafd7c1f601b2d5fc SHA1: bcf43fefc43ecb03d534b683bdb16ec6fe7384e0 MD5sum: 532bf1b8acea78a9f08488dc9cd85625 Description: utility for monitoring and managing daemons or similar programs monit is a utility for monitoring and managing daemons or similar programs running on a Unix system. It will start specified programs if they are not running and restart programs not responding. . monit supports: * Daemon mode - poll programs at a specified interval * Monitoring modes - active, passive or manual * Start, stop and restart of programs * Group and manage groups of programs * Process dependency definition * Logging to syslog or own logfile * Configuration - comprehensive controlfile * Runtime and TCP/IP port checking (tcp and udp) * SSL support for port checking * Unix domain socket checking * Process status and process timeout * Process cpu usage * Process memory usage * Process zombie check * Check the systems load average * Check a file or directory timestamp * Alert, stop or restart a process based on its characteristics * MD5 checksum for programs started and stopped by monit * Alert notification for program timeout, restart, checksum, stop resource and timestamp error * Flexible and customizable email alert messages * Protocol verification. HTTP, FTP, SMTP, POP, IMAP, NNTP, SSH, DWP, LDAPv2 and LDAPv3 * An http interface with optional SSL support to make monit accessible from a webbrowser Package: msmtp Version: 1.6.2-1 Architecture: amd64 Maintainer: Emmanuel Bouthenot Installed-Size: 310 Depends: libc6 (>= 2.15), libgnutls-deb0-28 (>= 3.3.0), libgsasl7 (>= 1.1), libidn11 (>= 1.13), debconf (>= 0.5) | debconf-2.0, ucf Recommends: ca-certificates Suggests: msmtp-mta Homepage: http://msmtp.sourceforge.net/ Priority: extra Section: mail Filename: pool/main/m/msmtp/msmtp_1.6.2-1_amd64.deb Size: 118282 SHA256: bfe1728cb1ac3507c6f7b52a748ceb1f6fd253bf6c345a00c0002a180cd1d29c SHA1: c44998cac9bb02cece19afc27673f97e7b7e75b7 MD5sum: f155f243a46e6d82d281830a8f2f13f6 Description: light SMTP client with support for server profiles msmtp is an SMTP client that can be used to send mails from Mutt and probably other MUAs (mail user agents). It forwards mails to an SMTP server (for example at a free mail provider), which takes care of the final delivery. Using profiles, it can be easily configured to use different SMTP servers with different configurations, which makes it ideal for mobile clients. . This package is compiled with GSASL and TLS/SSL support. Package: msmtp-mta Source: msmtp Version: 1.6.2-1 Architecture: all Maintainer: Emmanuel Bouthenot Installed-Size: 69 Depends: msmtp Conflicts: mail-transport-agent Replaces: mail-transport-agent Provides: mail-transport-agent Homepage: http://msmtp.sourceforge.net/ Priority: extra Section: mail Filename: pool/main/m/msmtp/msmtp-mta_1.6.2-1_all.deb Size: 14066 SHA256: 334ebf5ebe2d34b9d348f65d2cca27e7e2bc886c00bcea8facbc078bf2f25336 SHA1: 42d7610c42382d6e0fa66366f2a9c730ed2f6848 MD5sum: be82a69a92a60036ad49f29964f3cba3 Description: light SMTP client with support for server profiles - the regular MTA msmtp is an SMTP client that can be used to send mails from Mutt and probably other MUAs (mail user agents). It forwards mails to an SMTP server (for example at a free mail provider), which takes care of the final delivery. Using profiles, it can be easily configured to use different SMTP servers with different configurations, which makes it ideal for mobile clients. . This package is compiled with GSASL and TLS/SSL support. . This package provides the regular MTA program. Package: netfilter-persistent Source: iptables-persistent Version: 1.0.4~bpo8+1 Architecture: all Maintainer: Jonathan Wiltshire Installed-Size: 80 Depends: lsb-base, init-system-helpers (>= 1.18~) Suggests: iptables-persistent Breaks: iptables-persistent (<< 1~) Replaces: iptables-persistent (<< 1~) Priority: optional Section: admin Filename: pool/main/i/iptables-persistent/netfilter-persistent_1.0.4~bpo8+1_all.deb Size: 9628 SHA256: 58b73cd0f3ac4c490b18ac28b1144caf4acb42dbf192f10b43cdaa395d30104a SHA1: a2ecb3b1ee01917ad1faebe80c73b9c265e0b9af MD5sum: 502e0fbd74f892c499cef147421fc25d Description: boot-time loader for netfilter configuration This package provides a loader for netfilter configuration using a plugin-based architecture. It can load, flush and save a running configuration. Extending netfilter-persistent with plugins is trvial and can be done in any language. Package: nghttp2 Version: 1.0.4-1 Architecture: amd64 Maintainer: Dave Beckett Installed-Size: 987 Depends: libnghttp2-5 (= 1.0.4-1), libc6 (>= 2.14), libev4 (>= 1:4.04), libgcc1 (>= 1:4.1.1), libjansson4 (>= 2.0.1), libjemalloc1 (>= 2.1.1), libssl1.0.0 (>= 1.0.1), libstdc++6 (>= 4.9), libxml2 (>= 2.7.4), zlib1g (>= 1:1.1.4), lsb-base (>= 3.2-14) Multi-Arch: foreign Homepage: http://tatsuhiro-t.github.io/nghttp2/ Priority: optional Section: httpd Filename: pool/main/n/nghttp2/nghttp2_1.0.4-1_amd64.deb Size: 277438 SHA256: 24f3b9ce98eb5c74cf32f832113efc15e59e44800acbbd1bf9c28cba2d5ad733 SHA1: 8db37e89d64e705270f5a3e9111a0180f43028c4 MD5sum: 232a4bbc41ee237273e16d574f9df773 Description: nghttp HTTP 2.0 servers Provides experimental implementation of Hypertext Transfer Protocol version 2.0 including a server (nghttpd), client (nghttp) and reverse proxy (nghttpx) for fronting other HTTP servers. Package: opendkim Version: 2.11.0~alpha-8~bpo8+1 Architecture: amd64 Maintainer: Scott Kitterman Installed-Size: 434 Depends: libopendkim11 (= 2.11.0~alpha-8~bpo8+1), libbsd0 (>= 0.0), libc6 (>= 2.15), libdb5.3, libldap-2.4-2 (>= 2.4.7), liblua5.1-0, libmemcached11, libmemcachedutil2, libmilter1.0.1 (>= 8.14.1), libopendbx1 (>= 1.4.6), librbl1 (>= 2.7.2), libssl1.0.0 (>= 1.0.0), libunbound2 (>= 1.4.1), libvbr2 (>= 2.7.2), init-system-helpers (>= 1.18~), adduser, lsb-base, dns-root-data Suggests: opendkim-tools, unbound Homepage: http://www.opendkim.org/ Priority: extra Section: mail Filename: pool/main/o/opendkim/opendkim_2.11.0~alpha-8~bpo8+1_amd64.deb Size: 188412 SHA256: 1fe91a70d59d6f97751fb38d79db2d77a7b4ed9f3f6c9dc83cfd27a4f827bb2f SHA1: 435be035449f7ab42ec5495fd6ad84acb0ee9d9b MD5sum: 29659ed4598040a7f241f68ec6f2029f Description: Milter implementation of DomainKeys Identified Mail The OpenDKIM Project is a community effort to develop and maintain a C library for producing DKIM-aware applications and an open source milter for providing DomainKeys Identified Mail (DKIM) service. . DKIM provides a way for senders to confirm their identity when sending email by adding a cryptographic signature to the headers of the message. . This package contains the OpenDKIM mail filter (Milter) for plugging into Milter-aware MTAs. It implements both signing and verification. Package: opendkim-tools Source: opendkim Version: 2.11.0~alpha-8~bpo8+1 Architecture: amd64 Maintainer: Scott Kitterman Installed-Size: 428 Depends: libbsd0 (>= 0.0), libc6 (>= 2.15), libdb5.3, libldap-2.4-2 (>= 2.4.7), liblua5.1-0, libmemcached11, libmemcachedutil2, libopendbx1 (>= 1.4.6), libopendkim11 (>= 2.11.0~alpha), librbl1 (>= 2.7.2), libssl1.0.0 (>= 1.0.0), libunbound2 (>= 1.4.1), libvbr2 (>= 2.7.2) Breaks: opendkim (<< 2.5.2+dfsg-2~) Replaces: opendkim (<< 2.5.2+dfsg-2~) Homepage: http://www.opendkim.org/ Priority: extra Section: mail Filename: pool/main/o/opendkim/opendkim-tools_2.11.0~alpha-8~bpo8+1_amd64.deb Size: 133288 SHA256: 6cd7a330eeee6880301d77e0f38b6d86a70381ba60734443d77fc9a94bd64ffc SHA1: dd86cb04b4eeb4cc043ddee40b985ddf2a88acea MD5sum: cd3e6fffb09e424e8170e7d6fc50e323 Description: Set of command line tools for OpenDKIM The OpenDKIM Project is a community effort to develop and maintain a C library for producing DKIM-aware applications and an open source milter for providing DomainKeys Identified Mail (DKIM) service. . This package contains command line tools for the OpenDKIM mail filter (Milter). The following tools are included: - opendkim-genkey - miltertest - opendkim-stats - opendkim-genzone - opendkim-spam - opendkim-testkey - opendkim-atpszone - opendkim-convert-keylist - opendkim-testmsg Package: php5-realpath-turbo Source: php-realpath-turbo Version: 2.0.0-1 Architecture: amd64 Maintainer: Viktor Szepe Installed-Size: 46 Depends: libc6 (>= 2.2.5), phpapi-20131226 Priority: optional Section: web Filename: pool/main/p/php-realpath-turbo/php5-realpath-turbo_2.0.0-1_amd64.deb Size: 6666 SHA256: d63eee5827022d0a12b5a43e49354e22410bc548633267e2ff6fc61601ee8d94 SHA1: 55bcd9da213e6cf84f621310662a65ea2fd1c7fa MD5sum: d41a35f0a955cdd2ea7ed6c8663c04d8 Description: realpath-turbo module for PHP 5 Use realpath cache despite open_basedir restriction . When PHP's open_basedir restriction is set, PHP disables the realpath cache for security reasons. This may hurt your application performance. The realpath_turbo PHP extension re-enables the realpath cache. Warning: This could be a security problem in your environment! Please read the README for further information. Package: php5-suhosin-extension Maintainer: Ben Fuhrmannek Homepage: http://www.suhosin.org/ Conflicts: php5-suhosin Priority: extra Section: php Filename: pool/main/p/php5-suhosin-extension/php5-suhosin-extension_0.9.38-1~dev_amd64.deb Size: 185252 SHA256: c49b952a9a824b43ad344bf405e1af96ee5e50ab13ebfee44a8d485442c2beda SHA1: 9066045e5674497bad2a55fdcd5a27c288660ffd MD5sum: afbfc7f546ff8ee842f2630decfe3a4d Description: advanced protection system for PHP5 This package provides a PHP hardening module. . Suhosin is an advanced protection system for PHP installations. It was designed to protect servers and users from known and unknown flaws in PHP applications and the PHP core. Suhosin comes in two independent parts, that can be used separately or in combination. The first part is a small patch against the PHP core, that implements a few low-level protections against bufferoverflows or format string vulnerabilities and the second part is a powerful PHP extension that implements all the other protections. . This Package provides the suhosin extension only. Architecture: amd64 Version: 0.9.38-1~dev Package: python3-dugong Source: python-dugong Version: 3.7.1+dfsg-1~bpo8+1 Architecture: all Maintainer: Nikolaus Rath Installed-Size: 114 Depends: python3:any (>= 3.4~) Suggests: python-dugong-doc Homepage: https://bitbucket.org/nikratio/python-dugong Priority: optional Section: python Filename: pool/main/p/python-dugong/python3-dugong_3.7.1+dfsg-1~bpo8+1_all.deb Size: 21900 SHA256: 6a1bc113e0cb9f4124410b94ac31a9381008b5f0b32efd6d5ed93d41e7b765bb SHA1: f0ae06b98f36b940c8b1e0f550e96c6fd9d06198 MD5sum: 73c2bbaa809c0137b4849ee40198f949 Description: HTTP 1.1 client module for Python The Python Dugong module provides an API for communicating with HTTP 1.1 servers. It is an alternative to the standard library's http.client (formerly httplib) module. In contrast to http.client, Dugong: . * allows you to send multiple requests right after each other without having to read the responses first. * supports waiting for 100-continue before sending the request body. * raises an exception instead of silently delivering partial data if the connection is closed before all data has been received. * raises one specific exception (ConnectionClosed) if the connection has been closed (while http.client connection may raise any of BrokenPipeError, BadStatusLine, ConnectionAbortedError, ConnectionResetError, IncompleteRead or simply return '' on read) * supports non-blocking, asynchronous operation and is compatible with the asyncio module. * can in most cases distinguish between an unavailable DNS server and an unresolvable hostname. * is not compatible with old HTTP 0.9 or 1.0 servers. . All request and response headers are represented as str, but must be encodable in latin1. Request and response body must be bytes-like objects or binary streams. Package: python3-llfuse Source: python-llfuse Version: 1.2+dfsg-1~bpo8+1 Architecture: amd64 Maintainer: Nikolaus Rath Installed-Size: 675 Depends: python3 (<< 3.5), python3 (>= 3.4~), libc6 (>= 2.4), libfuse2 (>= 2.9.0) Suggests: python-llfuse-doc Breaks: borgbackup (<= 1.0.0~rc1-3) Provides: python3.4-llfuse Homepage: https://bitbucket.org/nikratio/python-llfuse/ Priority: optional Section: python Filename: pool/main/p/python-llfuse/python3-llfuse_1.2+dfsg-1~bpo8+1_amd64.deb Size: 186800 SHA256: 3e0c533eb94334c695b11aabecb9d14750ceffc8e61d7a98530c359ff4d89d95 SHA1: c3c6eb2f59eebe0a38605d1c6950ad271fd03aa4 MD5sum: 8e6e71aeb2307840f2edec2288321a84 Description: Python 3 bindings for the low-level FUSE API Python-llfuse is a set of Python bindings for the low level FUSE API. This package provides the extension for the Python 3 interpreter. The documentation is contained in the python-llfuse-doc package. . FUSE (Filesystem in USErspace) is a simple interface for userspace programs to export a virtual filesystem to the Linux kernel. FUSE also aims to provide a secure method for non privileged users to create and mount their own filesystem implementations. Package: rbldnsd Version: 0.998-2 Architecture: amd64 Maintainer: Michael Tokarev Installed-Size: 213 Depends: libc6 (>= 2.16), zlib1g (>= 1:1.1.4), adduser Priority: optional Section: net Filename: pool/main/r/rbldnsd/rbldnsd_0.998-2_amd64.deb Size: 103374 SHA256: 4f8fbb14575105b32932de7bf9d188f47c587ea51cea84e5f5ee00a3d1af5c5f SHA1: 7386a49b93f9df865d88e99d54f249aef9b2ff4a MD5sum: 85123515dc9640520e652576dfdab378 Description: small nameserver daemon designed for DNSBLs Rbldnsd is a small authoritate-only DNS nameserver designed to serve DNS-based blocklists (DNSBLs). It may handle IP-based and name-based blocklists. Package: s3ql Version: 2.23+dfsg-1~bpo8+1 Architecture: amd64 Maintainer: Nikolaus Rath Installed-Size: 1629 Depends: python3 (<< 3.5), python3 (>= 3.4~), python3-apsw (>= 3.7.0), python3-crypto, python3-defusedxml, python3-dugong (>= 3.4), python3-llfuse (>= 1.0), python3-requests, libc6 (>= 2.4), libsqlite3-0 (>= 3.6.23), libjs-sphinxdoc (>= 1.0), fuse, psmisc, python3-pkg-resources Recommends: python3-systemd Homepage: https://bitbucket.org/nikratio/s3ql/ Priority: optional Section: misc Filename: pool/main/s/s3ql/s3ql_2.23+dfsg-1~bpo8+1_amd64.deb Size: 540208 SHA256: a0c78a2bd390b62a67a658886cd0b5a0bfe8efaa3af3d5088fe7a21b6afb7b38 SHA1: efef7fca0709461297d727ae77424ef0983d98f5 MD5sum: 73057be55f6d63b94267518bac5624b7 Description: Full-featured file system for online data storage S3QL is a file system that stores all its data online using storage services like Google Storage, Amazon S3 or OpenStack. S3QL effectively provides a hard disk of dynamic, infinite capacity that can be accessed from any computer with internet access. . S3QL is a standard conforming, full featured UNIX file system that is conceptually indistinguishable from any local file system. Furthermore, S3QL has additional features like compression, encryption, data de-duplication, immutable trees and snapshotting which make it especially suitable for online backup and archival. . In addition to accessing online storage services directoly, S3QL can also store its data underneath a regular mount point. This enables the use of S3QL with e.g. NFS, CIFS or sftp servers. . S3QL is designed to favor simplicity and elegance over performance and feature-creep. Care has been taken to make the source code as readable and serviceable as possible. Solid error detection and error handling have been included from the very first line, and S3QL comes with extensive automated test cases. Package: sa-compile Source: spamassassin Version: 3.4.1-1 Architecture: all Maintainer: Noah Meyerhans Installed-Size: 110 Depends: spamassassin (>= 3.3.2-8), re2c, gcc, libc6-dev, make Enhances: spamassassin Conflicts: spamassassin (<= 3.3.2-7) Homepage: http://www.spamassassin.org/ Priority: optional Section: mail Filename: pool/main/s/spamassassin/sa-compile_3.4.1-1_all.deb Size: 54922 SHA256: f16956634ff6fdde497eccea47db8ca8ac566231901b3922cbc0d4e65251fc06 SHA1: 4357062c9c99bfb88f8dd8f42459a6a9e82446e0 MD5sum: 27f04032467afd5953e2ae4eaea85411 Description: Tools for compiling SpamAssassin rules into C sa-compile uses "re2c" to compile the site-wide parts of the SpamAssassin ruleset into C code for more efficient processing by spamd or spamassassin. Package: spamassassin Version: 3.4.1-1 Architecture: all Maintainer: Noah Meyerhans Installed-Size: 3871 Depends: perl (>= 5.8.0), libhtml-parser-perl (>= 3.43), libsocket6-perl, libsys-hostname-long-perl, libarchive-tar-perl, libwww-perl, libnet-dns-perl (>= 0.34), libnetaddr-ip-perl, perl-modules (>= 5.10) | libio-zlib-perl (>= 1.04), adduser, init-system-helpers (>= 1.18~) Recommends: spamc (>= 2.30), sa-compile, libmail-spf-perl, libsys-syslog-perl, gnupg, libio-socket-inet6-perl Suggests: razor (>= 2.361-2), libio-socket-ssl-perl, libdbi-perl, pyzor, libcompress-zlib-perl, libmail-dkim-perl Conflicts: gotmail (<= 0.8.1-1), spamass-milter (<< 0.2.0-7) Provides: libmail-spamassassin-perl Homepage: http://www.spamassassin.org/ Priority: optional Section: mail Filename: pool/main/s/spamassassin/spamassassin_3.4.1-1_all.deb Size: 1153190 SHA256: 101ff1ebd27363ed09bcc2f4c6e393e0bbd86c9c264fefe9d9642692e8a1b940 SHA1: 78a09f4c7497558c185c5b3502ef171c9602d592 MD5sum: 53439c781df38f8dbb02f9d2e2a841d1 Description: Perl-based spam filter using text analysis SpamAssassin is a very powerful and fully configurable spam filter with numerous features including automatic white-listing, RBL testing, Bayesian analysis, header and body text analysis. It is designed to be called from a user's .procmail or .forward file, but can also be integrated into a Mail Transport Agent (MTA). . Included in this package is a daemonized form of spamassassin (spamd) which communicates with its client (spamc) via TCP, to reduce the overhead of loading perl with each message. To take advantage of this, you must install the spamc package. Package: spamc Source: spamassassin Version: 3.4.1-1 Architecture: amd64 Maintainer: Noah Meyerhans Installed-Size: 150 Depends: libc6 (>= 2.14), libssl1.0.0 (>= 1.0.0), zlib1g (>= 1:1.1.4) Suggests: spamassassin Conflicts: spamassassin (<< 2.30-2) Homepage: http://www.spamassassin.org/ Priority: optional Section: mail Filename: pool/main/s/spamassassin/spamc_3.4.1-1_amd64.deb Size: 89080 SHA256: bb26b65a078ff09bdfa9972386aa8f63e27b20edb5c9cf6204a60de66eb12973 SHA1: 160d8e2c836d2cfb5ca3ad0df4840ebefec0c221 MD5sum: b5d78b069ae75cdc0c56ef343846d068 Description: Client for SpamAssassin spam filtering daemon spamc is the client to communicate with spamd, the daemonized form of SpamAssassin (see the spamassassin package). It is written in C for maximum speed and minimum loading overhead. . spamc is quite useful for integrating spamassassin into an MTA or into a .procmailrc file because of its speed. . This package is useless unless you have spamassassin installed, either on this machine or another local machine (i.e. a mail server). Package: ytnef Installed-Size: 116 Maintainer: viktor@szepe.net Architecture: amd64 Version: 2.8-1 Depends: libytnef0 (>= 1.5) Provides: ytnef Priority: extra Section: Applications/Productivity Filename: pool/main/y/ytnef/ytnef_2.8-1_amd64.deb Size: 27540 SHA256: 18849028c346451cdec318b763a5b585a7a079e6022262f0248f7ab701396599 SHA1: 3d43fe14daf7fe583a10e1fa38c13b4451334368 MD5sum: 294bb3a5db28c88783160910c367cff0 Description: Yerase's TNEF Stream Reader Yeraze's TNEF Stream Reader Package: zdkimfilter Installed-Size: 528 Maintainer: Viktor Szépe Architecture: amd64 Version: 1.5-4 Depends: libc6 (>= 2.15), libunistring0, libidn2-0, libnettle4, libopendbx1, libopendkim11, courier-mta Provides: zdkimfilter Priority: extra Section: mail Filename: pool/main/z/zdkimfilter/zdkimfilter_1.5-4_amd64.deb Size: 170698 SHA256: 8f2150d477ec17501e63c9f0b877ea77e41192fa2ebae8f9c720ac9df8f99d14 SHA1: 009e30c7afcd3bee6db1f6b088d6fac21d1ea8d5 MD5sum: a3b657302ded1a604b647b7e676941be Description: 'z' DKIM filter for Courier-MTA